4x4 bull bars - Pick up

BUFFALO GUARD L200

Stainless steel ox guard with reinforcements (protective claws) CE approved for Mitsubishi L200 from 2020
- Approved according to European standards
- Oval tube diameter 70 mm
- Includes 6 protective claws
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of front sensors
- Comes with complete installation kit

NAPARA BULL BARS
Stainless steel bull bars with reinforcement (protective claws) for Nissan Navara NP300 from 2016 to 2022
- Approved according to European standards
- Easily attached to the frame: fixing without drilling
- Oval tube diameter 90 mm.
- Comes with complete installation kit
- Requires overriding of the front sensors
- License plate to be moved slightly

D MAX BUMPER D MAX PROTECTION BAR BULL BAR D MAX Black Front Bumper Protector Bar with Reinforcements (Protective Claws) for Isuzu D Max N60 from 2020 onwards It is both a protection and a hubcap... - It is a protection that will allow you to break or scratch your front bumper less often! Currently, bumpers are often an integral part of the bodywork that is extremely expensive to replace! - This stainless steel accessory is also a hubcap that gives a trendy touch to your pick-up. - UTAC approved - Tube installation does not deactivate : anti-collision / speed limiter / cruise control - Installing the deactivated tube: the parking detector

BUMPER L200
L200 PROTECTION BAR
PARE-BUFFALO L200
Black front bumper protection bar with reinforcements (protective claws) for Mitsubishi L200 from 2020
NEW 2020: The long-awaited accessory!
It is both a protection and an embellishment...
- It's a protection that will allow you to break or scratch your front bumper less often!
Currently, bumpers are often an integral part of the extremely expensive body to replace!
- This stainless steel accessory is also a embellishment that gives a trendy touch to your pickup.

HILUX BULL BARS

Black stainless steel bull bars with reinforcement (protective claws) for Toyota Hilux Revo from 2018 to 2021

- Ox guard with oval tube
- Diameter 70 mm
- Includes 6 protective claws
- Approved according to European standards
- Comes with complete installation kit
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of front sensors
- Incompatible with Invincible finish
- NON-CONTRACTUAL PHOTO

BULL BARS L200 Black stainless steel bull bars with reinforcements (protective claws) CE approved for Mitsubishi L200 KB4T from 2006 to 2015 - Approved according to European standards - Oval tube diameter 70 mm - Includes 6 protective claws - Easily attached to the frame: fixing without drilling - Requires overriding of the front sensors - Comes with complete installation kit

HILUX BULL BARS Stainless steel bull bars with reinforcement (protective claws) for Toyota Hilux Revo from 2021 - Oval tube bull bars - Diameter 70 mm - Includes 6 protective claws - Approved according to European standards - Comes with complete installation kit - Easily attached to the frame: fixing without drilling - Requires overriding of the front sensors - Not compatible with the Invincible finish

BUFFALO GUARD L200 Stainless steel parebuffle for Mitsubishi L200 MY20 from 2020 - Clawless oval parebuffle - Stainless steel color Black - Composition: stainless steel - Diameter 3.5 inches - Requires periodic maintenance - Drilling-free mounting - Indicative exposure time: 2h - Product guaranteed one year - Approved product

BUFFALO GUARD ISUZU D MAX
BUFFALO GUARD D MAX N60


Bull Bars in Black without protective claws CE approved for Isuzu D Max from 2020

- Approved according to European standards
- Oval tube diameter 70 mm
- Easily attaches to the chassis: fixing without drilling
- Comes with complete installation kit

BUFFALO GUARD L200

Black stainless steel bull bar without claws CE approved for Mitsubishi L200 KB4T from 2006 to 2015

- Approved according to European standards
- Oval tube diameter 70 mm
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of front sensors
- Comes with complete installation kit

BUFFALO GUARD L200 Ce approved stainless steel bull bars without claws for Mitsubishi L200 KB4T from 2006 to 2015 - Approved according to European standards - Oval tube diameter 70 mm - Easily attaches to the chassis: fixing without drilling - Requires neutralization of front sensors - Comes with complete installation kit

BUFFALO GUARD L200

Black stainless steel bull bar without claws CE approved for Mitsubishi L200 from 2020
- Approved according to European standards
- Oval tube diameter 70 mm
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of front sensors
- Comes with complete installation kit

BUFFALO GUARD L200

Stainless steel bull bars without claws CE approved for Mitsubishi L200 KL60 from 2020
- Approved according to European standards
- Oval tube diameter 70 mm
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of front sensors
- Comes with complete installation kit

FULLBACK BULL BAR

Black stainless steel bull bars CE approved for Fiat Fullback from 2016
- Approved according to European standards
- Oval tube diameter 90 mm
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of front sensors
- Comes with complete installation kit

BUFFALO GUARD L200
Black stainless steel ox guard with oval tube for Mitsubishi L200 Plus Triton from 2016 to 2019
- Approved according to European standards
- Oval tube diameter 90 mm
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of front sensors
- Comes with complete installation kit.

FULLBACK BULL BAR

Ce approved stainless steel bull bars for Fiat Fullback from 2016
- Approved according to European standards
- Oval tube diameter 90 mm
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of front sensors
- Comes with complete installation kit

HILUX BULL BAR
Stainless steel bull bar for Toyota Hilux Revo from 2016 to 2019
- Approved according to European standards
- Oval tube diameter 90 mm
- Easily attaches to the chassis: fixing without drilling
- Comes with complete installation kit
- Requires neutralization of the front sensors
- Incompatible with invincible finish

BUFFALO GUARD RANGER

Black stainless steel ox guard with oval tube CE approved for Ford Ranger from 2012

- Approved according to European standards.
- Oval tube diameter 90 mm
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of front sensors
- Comes with complete installation kit.

Warning : the installation of this buffalo barrier removes the speed limiter and anti-collision detector options if your Ranger is equipped with them.

BUFFALO GUARD RANGER

Oval tube stainless steel bull bars for Ford Ranger from 2012

- Approved according to European standards
- Oval tube diameter 90 mm
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of front sensors
- Comes with complete installation kit.

Warning : the installation of this buffalo barrier removes the speed limiter and anti-collision detector options if your Ranger is equipped with them.