Prices drop

L200 ENGINE ARMOURPROTECTION OF CARTER L200Armour of the casing and low engine for Mitsubishi L200 Double Cabin or Club Cabin from 2016 to 2019 - The combination of strength and lightness: 5mm aluminium- Quality machining and finishing- Offers sufficient protection and as effective as many thicker and heavier armour

L200 HOOD DEFLECTOR Hood deflector for Mitsubishi L200 from 2016 to 2019 Of good quality and a neat aesthetic, this hood deflector is very useful to deflect air, dust, mud and rain and also avoids insect harvests and pebble projections! - Without drilling: No drilling of the hood, clips and screws on nuts of original screws provided. - Color: Black

CLASS X-CLASS ELECTRIC FOOT WALK
STEP FOOT E-STEP CLASS X
 
 
2 stainless steel electric side steps set for Mercedes X-Class Double Cab from 2018
 
Deploy and automatically slip away with opening and closing doors
The E-step is the accessory of the year for the Mercedes X-Class! Fashion and trend but also very practical, greatly facilitates the ascent and descent of your Pick-Up for yourself but also for the people who accompany you and who are not used to this type of vehicle.
Avoids damaging stockings and door sills with each climb/descent
 
The most essential that makes all the difference!
 
- Available also in Black- Neoprene non-slip skates- Installation without drilling
Video example:
 

CLASS X-CLASS ELECTRIC FOOT WALK
STEP FOOT E-STEP CLASS X


2 stainless steel electric side steps set for Mercedes X-Class Double Cab from 2018

Deploy and automatically slip away with opening and closing doors
The E-step is the accessory of the year for the Mercedes X-Class! Fashion and trend but also very practical, greatly facilitates the ascent and descent of your Pick-Up for yourself but also for the people who accompany you and who are not used to this type of vehicle.
Avoids damaging stockings and door sills with each climb/descent

The most essential that makes all the difference!

- Available also in Black- Neoprene non-slip skates- Installation without drilling
Video example:

LEDS BAR FORD RANGER 
RANGER LED BAR
1 LED bar for Ford Ranger from 2016 to 2023
- 1m LED bar
- Lighting function fully compliant with ECE standards - Double ECE certification
- Up to 525m light beam
Designed for far and near field lighting. For generalized near-field lighting and far-field point illumination.
Technical specifications:
- Light range 525 m
- Warm light: 6000 lm
- Color temperature: 6000 K
- Rated input power: 108 W
- Input voltage: 12/24 V
- IP  protection: IP67
- ECE: R112 (Ref ECE 50+ 50)
- EM/EMI: ECE R10
- Ambient temperature: -40 ° C to 80 ° C
- Cable length: 100 cm
- Weight: 2840 g
- Installation on cabin
- Attention sold without installation kit - To order with the reference: F3/4-KIT-FX1000
Possibility to add as an option : AX 1LS CABLE HARNESS WITH CAB SWITCH - LEDDL REFERENCE ACC 101

MUSSO BUMPER
MUSSO PROTECTIVE BAR
Black Stainless Steel Front Bumper Protection Bar for Ssangyong Musso from 2018 onwards
It is both a protection and a hubcap...
Currently, bumpers are often an integral part of the bodywork that is extremely expensive to replace!
- This stainless steel accessory is also a hubcap that gives a trendy touch to your pick-up.

MUSSO BUMPER
MUSSO PROTECTIVE BAR
The illustration photo shows the protective tube in black, non-contractual photo
Stainless Steel Front Bumper Protector Bar for Ssangyong Musso from 2018 onwards
It is both a protection and a hubcap...
Currently, bumpers are often an integral part of the bodywork that is extremely expensive to replace!
- This stainless steel accessory is also a hubcap that gives a trendy touch to your pick-up.

NAVARA DUMPSTER TRAY

Sliding dumpster tray for Nissan Navara NP300 Double Cabin from 2016

Designed to easily access your load, this dump tray is an indispensable tool! With this accessory you will be able to load and unload your dumpster without having to go up there.
- Composite wooden tray
- Easy installation and dismantling (without drilling)
- Supports 250 kg of load
- Metal frame with anchor points - 3 possible locking notches
- Mounted on bearing specially designed for heavy load
- With safety ledge
- Easily handles with a handle
- Cleans with water spray very easily
- Height between the bottom of the dumpster and the tray: 11 to 15 cm
- Compatible dumpster tray

NAVARA EXTENSION KIT KIT SUSPENSION NAVARA PROMYGES riser kit for Nissan Navara D40 This extension kit includes: - Front shock absorbers - Rear shock absorbers (+ shims for raising the rear blade) - 5cm extension / Crossing assist. - Ensures smooth driving while supporting a heavy load. - Ideal for mixed use (asphalt and off-road).

NAVARA EXTENSION KIT

PROFENDER Adjustable Riser Kit for Nissan Navara NP300 from 2016

For Double Cab equipped with springs only and for King Cab equipped with leaves
- Front shock absorbers
- Rear shock absorbers

We do not pose this item
To be assembled yourself or to be assembled by your usual mechanic
PROFENDER has been the specialist in 4x4 suspensions since 1976. (Non-contractual photos)

WALKING FOOT NAVARA

2 stainless steel tubular steps set for Nissan Navara NP300 Double Cab from 2016

- Visserie supplied
- Neoprene non-slip skates

Exist in Black ref N4-MP3

NAVARA BUFFALO PARE
Stainless buffalo shield with reinforcement (protective claws) for Nissan Navara D40 from 2010 to 2015
- Approved according to European standards
- Easily attaches to the chassis: fastening without drilling
- Oval tube 90 mm diameter
- Requires neutralization of the front sensors
- Comes with full installation kit.
WARNING: NOT SUITABLE FOR THE D40 V6 VERSION

NAVARA BUFFALO PARE
Stainless buffalo shield with reinforcement (protective claws) for Nissan Navara NP 300 from 2016
- Approved according to European standards
- Easily attaches to the chassis: fastening without drilling
- Oval tube 90 mm diameter.
- Comes with full installation kit
- Requires neutralization of the front sensors
- License plate to be moved slightly

NAVARA TIPPER COVER
NAVARA TONNEAU COVER
TONNEAU COVER NAVARA

Ribbed aluminium dump cover for Nissan Navara D40 Double Cab Long Tipper 160 cm

ULTRA-RESISTANT
- Ribbed aluminium body cover
- 45° opening
- Mounted on gas springs
- Rails that allow the addition of sliding bars* (up to 70kg of additional load)
- Compatible with rimless dumpster
- Secure closure with handle + key (2 included)
- Quick assembly and dismantling

Don't Forget Optional: Sliding Bar Kit

NAVARA TRACK LEGISLATORS

Alu track widener kit for Nissan Navara D40 and NP300
Give your Navara a fabulous look, it will look even wider even more impressive! especially with a wing extender kit!
Double boltingWith studsModel: NavaraType: 2AB30 mm thickness per holdHoles: 6Entrax: 6x114.3Diam. Aling: 93.1 mmStud threading: M12x150
Matter: ALUMINIUM
Visserie to secure hold: supplied

We do not ensure the installation of this article: To ride yourself or to be mounted by your usual mechanic

BUFFALO GUARD L200

Stainless steel bull bars with reinforcements (protective claws) CE approved for Mitsubishi L200 KB4T from 2006 to 2015

- Approved according to European standards
- Oval tube diameter 70 mm
- Includes 6 protective claws
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of front sensors
- Comes with complete installation kit

BUFFALO GUARD L200

Stainless steel ox guard with reinforcements (protective claws) CE approved for Mitsubishi L200 from 2020
- Approved according to European standards
- Oval tube diameter 70 mm
- Includes 6 protective claws
- Easily attaches to the chassis: fixing without drilling
- Requires neutralization of front sensors
- Comes with complete installation kit

AMAROK SLIDING BUCKET TRAY

Sliding dumpster tray for VW Amarok

Designed to easily access your load, this sliding dumpster tray is an indispensable tool! With this accessory you can load and unload your dumpster without having to climb it.

- Easy installation and disassembly (without drilling)
- Dimensions: 138 cm in length, 133 cm in width, 18 cm in height (without the support) / 24 cm in height with the support.
- Supports 250 Kg of load in the open position, 500 kg in the closed position
- 3 possible veneration notches
- Mounted on a bearing specially designed for heavy load
- With security ledge
- Easily handled with a handle
- Cleans with a water jet very easily
- Height between the bottom of the dumpster and the tray: 11 to 15 cm

D-MAX SLIDING BUCKET TRAY

Sliding bucket tray for Isuzu D-Max N60 Crew Cabin from 2021
Designed to easily access your load, this sliding dumpster tray is an indispensable tool! With this accessory you can load and unload your dumpster without having to climb it.

- Easy installation and disassembly (without drilling)
- Supports 250 Kg of load
- 3 possible veneration notches
- Mounted on a bearing specially designed for heavy load
- With security ledge
- Easily handled with a handle
- Cleans with a water jet very easily
- Height between the bottom of the dumpster and the tray: 11 to 15 cm

D-MAX SLIDING BUCKET TRAY
Sliding bucket tray for Isuzu D-Max RT50 Crew Cabin from 2012 to 2020
Designed to easily access your load, this sliding dumpster tray is an indispensable tool! With this accessory you can load and unload your dumpster without having to climb it.
- Easy installation and disassembly (without drilling)
- Supports 250 Kg of load
- 3 possible veneration notches
- Mounted on a bearing specially designed for heavy load
- With security ledge
- Easily handled with a handle
- Cleans with a water jet very easily
- Height between the bottom of the dumpster and the tray: 11 to 15 cm